Truck-Mounted Cranes: Reach and Lifting Capacity
A truck-mounted telescopic crane is an option for equipment handling on suitable rescue and service vehicles. This example describes a separate crane installation.

Rated duty examples
Each row describes a separate equipment configuration from technical literature. Figures are rated duty points, subject to the selected curve, controls and operating conditions.
11.2 m
| Working radius (m) | Listed load (kg) |
|---|---|
| 2.5 | 1600 |
| 6 | 1100 |
| 8 | 775 |
| 10 | 580 |
| 10.98 | 500 |
Boom length and working radius
Boom length, horizontal working radius and lifting height describe different dimensions. The example has a 3.94–11.20 m boom, a stated maximum lifting height of 12.4 m and an outrigger span of 2.15–5.10 m. These limits are checked against the installed vehicle and actual working envelope.
Read the load chart
With the 11.2 m boom, the supplied table lists 1,600 kg at 2.5 m radius, 1,100 kg at 6 m, 775 kg at 8 m and 580 kg at 10 m. At 10.98 m the listed load is 500 kg. The maximum 5,000 kg belongs to the short-boom condition. Check configuration, stabilizers, ground and lifting accessories against the actual operating manual.
Hydraulics and installation
The example specifies 63 L/min hydraulic flow, 22 MPa working pressure, 26 kW recommended power and a 90 L tank. Check mounting structure, axle loads, available payload, oil cooling and stabilizer clearance together. Send load weight, pickup and placement radius, lifting height and site conditions.