Mobile Water Quality Testing Vehicles
Mobile water quality testing vehicles built on light commercial vans — rapid physicochemical and contamination testing of surface, drinking and wastewater, with a live data link back to base. CCC/GB baseline, export-configured, Nanjing Fengqi, China.
Why Choose Our Mobile Water Labs
Sampling and physicochemical analysis happen inside the van, so results return the same shift instead of waiting on a lab round-trip.
Readings and geo-tagged samples transmit over 5G / private-network comms, so water utilities and environment agencies see results as they are taken.
A side-mounted generator with power cabinet and UPS, plus a mains inlet for shore power, runs the analyzers through long field shifts away from base.
CCC/GB baseline, configured to destination requirements with COC where applicable; accountability for the conversion stays with one party.
Water Quality Testing Vehicles — Example Build
IVECO Daily M1-33S Environmental Monitoring Vehicle
Mobile Air & Water Quality Inspection Van
A mobile environmental monitoring platform on the IVECO Daily M1-33S long-wheelbase medium-roof van (4.0 t GVW, F1C 3.0T diesel). Fitted for on-road air, water-quality and emissions monitoring, with side generator, UPS and a data/comms link.
| Vehicle Model | Environmental Monitoring Vehicle |
| Emission Standard (China V / China VI / Euro III–VI) | China VI / Euro VI |
| Fuel Type (Diesel / Gasoline / Electric / Hybrid) | Diesel |
| Drive Configuration (4×2 / 6×4 / 8×4 / 4×4) | 4x2 |
| Overall Dimensions (L × W × H) mm | 5495,5595x2040,2060x2280,3100,3130,3180(mm) |
| Engine Displacement (L) | 2.0L 3.0L |
| Seating Capacity | 3-5 pax |
What this page covers
A mobile water quality testing vehicle is a van converted into an on-site water lab — sampling and rapid physicochemical and contamination testing of surface, drinking and wastewater, with a live data link. The example build below shows the platform we fit for this mission.
Who uses them
- Water utilities running routine and emergency sampling across a network
- Environmental protection agencies monitoring rivers, lakes and discharge points
- Industrial parks and enterprises checking process and effluent water on site
- Disaster and emergency teams needing rapid water-safety checks in the field
Example build
A representative mobile water-testing platform from our detection range.
| Build | Base | What goes inside |
|---|---|---|
| Water quality testing | IVECO Daily M1-33S | Sampling train and analyzers for physicochemical and contamination testing, integrated power, live data link. |
Chassis options
Chassis shown are examples with available photos. We can build the same water-testing upfit on any chassis procurable in the China market — tell us your preferred base and we engineer the body and power layout around it.
Onboard equipment & power
A typical fit-out includes the sampling train, analyzer bench and equipment cabinet, plus a side-mounted generator with power cabinet and UPS, a mains inlet for shore power, image capture and transmission, communications command, roof lighting and eco-friendly flooring. The exact package is set by the required mission, not fixed per vehicle.
Compliance & export
Builds start from Chinese CCC / GB as the baseline. Export units are configured to the buyer's destination requirements, with documentation support such as COC where applicable. The upfit is integrated in-house, so responsibility for the conversion stays with one party.
Related vehicle ranges
Detection & monitoring hub
The full detection range — environmental, water, food-safety, oil and emission testing on one page.
Mobile inspection
Multi-scene quality and environmental testing vans, plus robotics deployment platforms.
All solutions
Eight Fengqi series — pick the mission that fits and see what goes inside, how we build it, and how it ships.
Common Questions on Mobile Water Testing Builds
What can a mobile water lab test?+
Physicochemical parameters and contamination screening of surface, drinking and wastewater — pH, conductivity, dissolved oxygen, turbidity, metals and other indicators by the analyzer fitted. The exact parameter set follows the mission and the instruments chosen.
Which chassis do you use?+
The build shown uses a light commercial van we have photos for — IVECO Daily M1-33S, diesel, 4x2. It is representative: we upfit on any chassis procurable in the China market, and specify heavier or 4x4 platforms by mission.
How is power supplied for the analyzers?+
A side-mounted generator with power cabinet and UPS, plus a mains inlet for shore power. The layout is sized to the analyzer load so equipment runs through long field shifts.
Can the data be transmitted live?+
Yes. Image capture and transmission, communications command and 5G / private-network links are part of the typical fit-out, so readings and video return to base in real time.
Compliance and export — how does that work?+
Builds start from Chinese CCC / GB as the baseline and are configured to the buyer’s destination requirements, with documentation support such as COC where applicable. The conversion is integrated in-house, so accountability stays with one party.
What about budget and lead time?+
Both follow the configuration: chassis, analyzer package and power layout. We quote per build after the specification is confirmed, so the number follows the truck, not the other way round.
Request A Quotation
Tell us your chassis preference, target market and equipment list. We respond within 2 business days.
WeChat QR
WhatsApp QR
